Understanding Schemas; If-Stats Schema Objects; Table 24: Data Retrieved According To Schema - Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual

System basics configuration guide software for e series broadband services routers
Table of Contents

Advertisement

Understanding Schemas

You can set a management schema for bulk statistics. A schema is a group of attributes
or counters that provide an efficient way to retrieve specific types of information
about the router. The bulk statistics application supports schemas listed in Table 24
on page 215.
NOTE: There are no explicit schema objects for the if-stack and system schemas.
Table 24 on page 215 shows the type of data each schema retrieves.

Table 24: Data Retrieved According to Schema

If-Stats Schema Objects

Table 25 on page 216 describes the if-stats objects that you can configure using the
bulkstats schema subtree if-stats command.
Collector
Virtual-Routers
---------
---------------
33
serviceProviderABC
655
default
See show bulkstats virtual-routers.
Schema
Retrieves
if-stack
The interface and interface column configuration. It is a complete retrieval of the
ifStackTable, which stores the configured interfaces and their stacking relationship
on a router.
if-stats
Usage data on sets of interface types. The interface usage data is the ifTable/ifXTable
counters. The ifXTable supports 64-bit counters and the data written into the bulk
statistics file supports the 64-bit counters.
igmp
Statistics associated with various IGMP components.
policy
Statistics associated with a specified policy, a policy type, or traffic tagged by a policy
with a color tag.
qos
QoS statistics on egress queues for various interface types. The QoS schema enables
service providers to keep track of network congestion and monitor oversubscription
on the egress queues of the router.
system
Global system and per-module statistics and information. The global system statistics
retrieved are the sysUpTime and nvsUtilPct. The per-module statistics and information
retrieved include the intPhysicalDesc, the cpuUtilPct, and the memUtilPct.
Chapter 4: Configuring SNMP
Collecting Bulk Statistics
215

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.1

Table of Contents