Table of Contents
Advertisement
Network and Security Manager Administration Guide
ScreenOS Threat Management Features
368
Enter the URLs that make up the pattern.
5.
Select
OK.
6.
URL Categories
A URL category is a list of URL Patterns that belong to the same category. To create a
URL category:
Select
Object Manager
1.
Predefined UTM URL Categories on top and Custom UTM URL Categories below.
You can only view but not edit the listed predefined categories. You can create and
edit your own categories.
Select
in the Custom UTM URL Categories table. The
+
2.
opens.
Enter a name for the category.
3.
Enter a comment or description.
4.
View or edit entries in the
5.
Select URL patterns from the list or add new patterns by clicking on
6.
Select
OK.
7.
You can continue to use ScreenOS features to configure and manage AV and Web Filtering
objects, as well as configure ICAP servers.
Configuring Antivirus Objects on page 368
Configuring External AV Profiles on page 369
Configuring Internal AV Profiles on page 370
Configuring ICAP AV Servers and Profiles on page 371
Configuring ICAP AV Profiles on page 372
Configuring Web Filtering Objects on page 373
Configuring Antivirus Objects
Security devices provide one or more of the following antivirus scanning methods:
External AV scanning—This method forwards traffic to a Trend Micro device for
scanning. (This option is not supported by devices running ScreenOS 5.3 or higher.)
The security device forwards all traffic to be scanned to the Trend Micro device. To
configure external AV scanning, use the AV Scanner settings (detailed below).
Internal AV scanning—This method uses the AV scanner on the security device, and is
not supported by all security devices. Internal scanning may be configured on a
per-device basis, or it may be configured via templates. This section describes how to
create the templates.
>
UTM
>
Misc
>
URL Category.
box.
UTM Pattern Entries
NSM displays two tables:
window
New URL Category
.
+
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
