Configuring The Mib Profile (Nsm Procedure); Table 34: Policy Decision Statistics Profile Configuration Details - Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1 Manual

M-series and mx-series devices guide
Table of Contents

Advertisement

M-series and MX-series Devices

Configuring the MIB Profile (NSM Procedure)

76
Click the Configuration tab. In the configuration tree, expand Accounting Options.
3.
Select Policy Decision Statistics Profile.
4.
Add or modify the settings as specified in Table 34 on page 76.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.

Table 34: Policy Decision Statistics Profile Configuration Details

Task
Configure policy decision
statistics profile.
Configure application
awareness access list.
The MIB profile collects MIB statistics and logs them to a file. The MIB profile specifies
the SNMP operation and MIB object names for which statistics are collected.
To configure the MIB profile in NSM:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device to select it.
2.
Click the Configuration tab. In the configuration tree, expand Accounting Options.
3.
Select MIB Profile.
4.
Your Action
1.
Click Add new entry next to Policy Decision Statistics Profile.
2.
Expand policy-decision-statistics-profile.
3.
In the Name box, enter the name of the policy decision
statistics profile.
4.
In the Comment box, enter the comment for the policy
decision statistics profile.
5.
In the File box, enter the name of the log file.
1.
Click Application Awareness Access List next to
policy-decision-statistics-profile.
2.
Select the name of the field:
address—Address of subscriber
application—Application
application-group—Application group
input-bytes—Input bytes
input-interface—Interface of subscriber
input-packets—Input packets
mask—Mask of subscriber
output-bytes—Output bytes
output-packets—Output packets
subscriber-name—Name of subscriber
timestamp—Timestamp of statistics record
vrf-name—VRF where subscriber resides
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1 and is the answer not in the manual?

This manual is also suitable for:

Network and security manager 2010.3

Table of Contents