Table of Contents
Advertisement
2
INSTALLATION
2.1
CHECKING INSTALLATION SITE
14
Lift the cabinet by the base. When moving the unit, never lift by the front
D
cover or the front panel.
Otherwise, the main unit may be dropped causing damage to the unit.
Mount the power regenerative unit on nonflammable material (i.e. metal).
D
Failure to observe this caution can result in a fire.
When mounting units in an enclosure, install a fan or other cooling device
D
to keep the intake air temperature below 45°C.
Overheating may cause a fire or damage to the unit.
This chapter describes the configuration, location and space when mounting the
VS-656RC5.
(1) Installation Site
Install the power regenerative unit under the following conditions.
Type
Enclosed
wall-mounted
Open chassis
Protection covers are attached to the top and bottom of the power regenerative
unit. Be sure to remove the protection covers before installing a 200 or 400 V
Class power regenerative unit with an output of 30 kW or less in a panel.
CAUTION
Ambient Operating Temperature
−10 to + 40 °C
−10 to + 45 °C
Humidity
90 % RH or less (no condensation)
90 % RH or less (no condensation)
Advertisement
Table of Contents
