Table of Contents
Advertisement
i.1 Conditions of Acceptability
i.1
Conditions of Acceptability
NEC, CEC and UL Compliance
In order to comply with the NEC, CEC and UL, the following conditions of use must be strictly adhered to:
Surge Protector Installation
• An MOV must be installed on the input of the RC5 Unit.
Current Suppression Reactor Installation
• The Current Suppression Reactor must be installed as shown in
Terminal Blocks
• The Power Terminal Blocks of the RC5 unit are for factory wiring use only.
Installation Environment
• Install the RC5 Unit in a protective enclosure suitable to its environment.
CSA Standards Compliance
The RC5 is CSA certified as following.
Products
CLASS 3211 06
INDUSTRIAL CONTROL EQUIPMENT
Motor Controllers Miscellaneous
CLASS 2411 02
ELEVATOR EQUIPMENT
Enclosed Elevator and Escalator Electrical Equipment
Applicable Requirements
CAN/CSA C22.2 No.0.4-04
Bonding of Electrical Equipment
CAN/CSA C22.2 No.14-05
Industrial Control Equipment
CSA B44.1-04/ASME A17.5-2004
Elevator and Escalator Electrical Equipment
Figure i.1
4
Figure
3.1.
CSA B44.1 /
ASME A17.5
Figure i.1 CSA B44.1-04/ASME A17.5-2004 Mark
YASKAWA ELECTRIC TOEP C710656 01C YASKAWA - RC5 Instruction Manual
Advertisement
Table of Contents
