VACON® 3000
Application Guide
8.2.6.23 Fault Code 8, ID 648 - System Fault
Cause
•
Operation malfunction.
•
The system software is not compatible with the application.
Troubleshooting
•
Reset the fault and restart.
•
Download the latest software from the Danfoss Drives website. Update the drive with it.
•
If the fault occurs again, ask for instructions from your nearest distributor.
8.2.6.24 Fault Code 8, ID 667 - System Fault
Cause
•
Ethernet PHY is not recognized or it is in the wrong state.
Troubleshooting
•
Reset the fault and restart the AC drive.
•
Download the newest software from the Danfoss Drives website. Update the drive with it.
•
If the fault occurs again, ask for instructions from your nearest distributor.
8.2.6.25 Fault Code 8, ID 670 - System Fault
Cause
Troubleshooting
•
Check the loading of the auxiliary output.
•
Reset the fault and restart the AC drive.
•
Download the newest software from the Danfoss Drives website. Update the drive with it.
•
If the fault occurs again, ask for instructions from your nearest distributor.
8.2.6.26 Fault Code 8, ID 681 - System Fault
Cause
•
The maximum amount of datatables has been reserved.
Troubleshooting
•
Reset faults and alarms that are waiting to be reset. Active faults cannot be reset.
•
Return to previous working software version.
•
If the fault occurs again, ask instructions from your nearest service center or distributor.
8.2.6.27 Fault Code 8, ID 827 - System Fault
Cause
•
Invalid/incorrect license key provided (via keypad or VCX).
•
The license key is incorrect or not for this drive.
Troubleshooting
•
Reset the fault and restart the AC drive.
•
Download the newest software from the Danfoss Drives website. Update the drive with it.
•
If the fault occurs again, ask for instructions from your nearest distributor.
8.2.6.28 Fault Code 8, ID 828 - System Fault
Cause
•
The entered license key was accepted and stored to the drive.
Troubleshooting
•
No actions required. Notification only.
Danfoss A/S © 2021.09
Fault tracing
AB319735759636en-000101 / DPD01822 | 277
Need help?
Do you have a question about the VACON 3000 and is the answer not in the manual?