Danfoss VACON 3000 Application Manual page 234

VACON® 3000
Application Guide
7.357 (ID 3323) Precharge Restart Limit
Location in the menu:
• INU application: P3.17.3.3
• AFE application: P3.3.3.3
Use this parameter to set the restart voltage limit for the precharge operation.
7.358 (ID 3324) Maximum DC Slew Rate
Location in the menu:
• INU application: P3.17.3.4
• AFE application: P3.3.3.4
Use this parameter to set the maximum DC voltage slew rate in V/s, which is permitted during the precharge operation.
7.359 (ID 3325) Minimum DC Slew Rate
Location in the menu:
• INU application: P3.17.3.5
• AFE application: P3.3.3.5
Use this parameter to set the minimum DC voltage slew rate in V/s, which is possible during the precharge operation.
7.360 (ID 3330) Fault Clear Timeout
Location in the menu:
• INU application: P3.17.4.1
• AFE application: P3.3.4.1
Use this parameter to set the maximum fault clear timeout for the front end.
7.361 (ID 3331) MX Open Timeout
Location in the menu:
• INU application: P3.17.4.2
• AFE application: P3.3.4.2
Use this parameter to set the maximum open response time for the main contactor.
7.362 (ID 3332) MX Close Timeout
Location in the menu:
• INU application: P3.17.4.3
• AFE application: P3.3.4.3
Use this parameter to set the maximum close response time for the main contactor.
7.363 (ID 3333) KMX Open Timeout
Location in the menu:
• INU application: P3.17.4.4
•
AFE application: P3.3.4.4
Use this parameter to set the maximum open response time for the main contactor pilot.
7.364 (ID 3334) KMX Close Timeout
Location in the menu:
• INU application: P3.17.4.5
• AFE application: P3.3.4.5
Use this parameter to set the maximum close response time for the main contactor pilot.
234 | Danfoss A/S © 2021.09
Parameter descriptions
AB319735759636en-000101 / DPD01822