Table of Contents
Advertisement
VACON® 3000
Application Guide
7.497 (ID 3730) Enclosure Temperature Status 3.1
Location in the menu:
•
INU application: P3.17.2.2.77
•
AFE application: P3.3.2.2.87
Use this parameter to select the digital input signal for the temperature status of the enclosure.
By default, temperature is OK when the signal is active. To invert the signal, so that temperature is OK when the signal is inactive,
use parameter ID 3736.
7.498 (ID 3731) Enclosure Temperature Status 3.2
Location in the menu:
•
INU application: P3.17.2.2.78
•
AFE application: P3.3.2.2.88
Use this parameter to select the digital input signal for the temperature status of the enclosure.
By default, temperature is OK when the signal is active. To invert the signal, so that temperature is OK when the signal is inactive,
use parameter ID 3736.
7.499 (ID 3732) Enclosure Temperature Status 3.3
Location in the menu:
•
INU application: P3.17.2.2.79
•
AFE application: P3.3.2.2.89
Use this parameter to select the digital input signal for the temperature status of the enclosure.
By default, temperature is OK when the signal is active. To invert the signal, so that temperature is OK when the signal is inactive,
use parameter ID 3736.
7.500 (ID 3733) Enclosure Temperature Status 4.1
Location in the menu:
•
INU application: P3.17.2.2.80
•
AFE application: P3.3.2.2.90
Use this parameter to select the digital input signal for the temperature status of the enclosure.
By default, temperature is OK when the signal is active. To invert the signal, so that temperature is OK when the signal is inactive,
use parameter ID 3736.
7.501 (ID 3734) Enclosure Temperature Status 4.2
Location in the menu:
•
INU application: P3.17.2.2.81
•
AFE application: P3.3.2.2.91
Use this parameter to select the digital input signal for the temperature status of the enclosure.
By default, temperature is OK when the signal is active. To invert the signal, so that temperature is OK when the signal is inactive,
use parameter ID 3736.
7.502 (ID 3735) Enclosure Temperature Status 4.3
Location in the menu:
•
INU application: P3.17.2.2.82
•
AFE application: P3.3.2.2.92
Use this parameter to select the digital input signal for the temperature status of the enclosure.
By default, temperature is OK when the signal is active. To invert the signal, so that temperature is OK when the signal is inactive,
use parameter ID 3736.
7.503 (ID 3736) Enclosure Humidity, Temp Status Invert
Location in the menu:
252 | Danfoss A/S © 2021.09
Parameter descriptions
AB319735759636en-000101 / DPD01822
Advertisement
Table of Contents
