Danfoss VACON 3000 Application Manual page 245

VACON® 3000
Application Guide
7.440 (ID 3645) Leak Detection System OK 2
Location in the menu:
• INU application: P3.17.2.2.43
• AFE application: P3.3.2.2.41
Use this parameter to select the digital input signal for the leak detection system status 2.
• Active signal = System OK.
7.441 (ID 3646) Leak Detection System OK 3
Location in the menu:
• INU application: P3.17.2.2.44
•
AFE application: P3.3.2.2.42
Use this parameter to select the digital input signal for the leak detection system status 3.
• Active signal = System OK.
7.442 (ID 3647) Leak Detection System OK 4
Location in the menu:
•
INU application: P3.17.2.2.45
• AFE application: P3.3.2.2.43
Use this parameter to select the digital input signal for the leak detection system status 4.
• Active signal = System OK.
7.443 (ID 3648) Leak Detection No Leak 1
Location in the menu:
• INU application: P3.17.2.2.46
• AFE application: P3.3.2.2.44
Use this parameter to select the digital input signal for the leak detection status 1.
• Active signal = No leak.
7.444 (ID 3649) Leak Detection No Leak 2
Location in the menu:
• INU application: P3.17.2.2.47
• AFE application: P3.3.2.2.45
Use this parameter to select the digital input signal for the leak detection status 2.
• Active signal = No leak.
7.445 (ID 3650) Leak Detection No Leak 3
Location in the menu:
• INU application: P3.17.2.2.48
• AFE application: P3.3.2.2.46
Use this parameter to select the digital input signal for the leak detection status 3.
• Active signal = No leak.
7.446 (ID 3651) Leak Detection No Leak 4
Location in the menu:
•
INU application: P3.17.2.2.49
•
AFE application: P3.3.2.2.47
Use this parameter to select the digital input signal for the leak detection status 4.
• Active signal = No leak.
Danfoss A/S © 2021.09
Parameter descriptions
AB319735759636en-000101 / DPD01822 | 245