Danfoss VACON 3000 Application Manual page 155

VACON® 3000
Application Guide
This monitoring value shows the measured quadrature voltage of the supply network when the grid voltage is available. When the
measurement is not available, the monitoring value shows an estimate of the voltage.
6.144 (ID 5530) AFE Output Current
Location in the menu:
•
AFE application: V2.3.3.11
This monitoring value shows the calculated AFE output current.
6.145 (ID 5640) Analog Input 7
Location in the menu:
• AFE application: V2.4.15
This monitoring value shows the value of the analog input signal as a percentage of the used range.
6.146 (ID 5641) Analog Input 8
Location in the menu:
• AFE application: V2.4.16
This monitoring value shows the value of the analog input signal as a percentage of the used range.
6.147 (ID 5642) Analog Input 9
Location in the menu:
• AFE application: V2.4.17
This monitoring value shows the value of the analog input signal as a percentage of the used range.
6.148 (ID 5643) Analog Input 10
Location in the menu:
• AFE application: V2.4.18
This monitoring value shows the value of the analog input signal as a percentage of the used range.
6.149 (ID 6043) MVS DIN Status Word
Location in the menu:
•
INU application: V2.6.17
•
AFE application: V2.6.13
This monitoring value shows 16-bit word where each bit is the status of one digital input.
Danfoss A/S © 2021.09
Monitoring value descriptions
AB319735759636en-000101 / DPD01822 | 155