User Settings; User Settings Parameters; Parameter Backup Parameters; Parameter Compare Parameters - Danfoss VACON 3000 Application Manual

VACON® 3000
Application Guide

4.8 User Settings

4.8.1 User Settings Parameters

Table 112: General Settings in the User Settings Menu
Index Parameter
P6.1 Language selection
M6.5 Parameter backup
M6.6 Parameter compare
P6.7 Drive name
M6.8 Licenses

4.8.2 Parameter Backup Parameters

Table 113: The Parameter Backup Parameters in the User Settings menu
Index Parameter
B6.5.1 Restore Factory De-
faults
B6.5.4 Save to Set 1
B6.5.5 Restore from Set 1
B6.5.6 Save to Set 2
B6.5.7 Restore from Set 2

4.8.3 Parameter Compare Parameters

Table 114: Parameter Compare Parameters in the User Settings Menu
Index Parameter
B6.6.1 Active set - Set 1
B6.6.2 Active set - Set 2
B6.6.3 Active set - Defaults
B6.6.4 Active set - Keypad Set

4.8.4 License Parameters

Table 115: License Parameters in the User Settings Menu
Index Parameter Min
P6.8.1 Insert License
Danfoss A/S © 2021.09
Min Max Unit Default
Varies Varies Varies
Min Max Unit De-
fault
Min
Max Unit Default ID
ID Description
802 The selection is different in all the language packages.
See 4.8.2 Parameter Backup
See 4.8.3 Parameter Compare
2528 Use VACON Live PC tool to give a name to the drive if
®
necessary.
See 4.8.4 License
ID Description
831 Restores the default parameter values and starts the Startup
wizard.
2489 Keeps a customized parameter set (that is, all the parame-
ters included in the application).
2490 Loads the customized parameter set to the drive.
2491 Keeps another customized parameter set (that is, all the pa-
rameters included in the application).
2492 Loads the customized parameter set 2 to the drive.
Max Unit Default
Description
Insert a drive-specific license to enable new features or remove add-
ed features.
INU Application
Parameters.
Parameters.
Parameters.
ID Description
2493
2494
2495
2496
AB319735759636en-000101 / DPD01822 | 93