Table of Contents
Advertisement
VACON® 3000
Application Guide
Example
The value 1a 143d 02:21 is received from the run time counter from the fieldbus.
•
ID1772: 1 (years)
•
ID1773: 143 (days)
•
ID1774: 2 (hours)
•
ID1775: 21 (minutes)
•
ID1776: 0 (seconds)
8.3.4 Power on Time Counter
The power on time counter of the power unit is in the submenu Total counters. It is not possible to reset the counter. The value of
the counter has 5 different 16-bit values. To read the value of the counter through fieldbus, use these ID numbers.
ID number
ID 1777
ID 1778
ID 1779
ID 1780
ID 1781
Example
The value 1a 240d 02:18 is received from the power on time counter from the fieldbus.
•
ID1777: 1 (years)
•
ID1778: 240 (days)
•
ID1779: 2 (hours)
•
ID1780: 18 (minutes)
•
ID1781: 0 (seconds)
8.3.5 Energy Counter
The energy counter counts the total quantity of energy that the drive gets from the supply network. The counter cannot be reset. To
read the value of the counter through fieldbus, use these ID numbers.
ID number
ID 2291
The value always has 4 digits. The format and the unit of the counter change to agree with the energy counter value.
Example
•
0.001 kWh
•
0.010 kWh
•
0.100 kWh
•
1.000 kWh
•
10.00 kWh
•
100.0 kWh
•
1.000 MWh
•
10.00 MWh
•
100.0 MWh
•
1.000 GWh
•
and so on
Danfoss A/S © 2021.09
Counter value
Power On Time Counter (years)
Power On Time Counter (days)
Power On Time Counter (hours)
Power On Time Counter (minutes)
Power On Time Counter (seconds)
Counter value
Energy Counter
Fault tracing
AB319735759636en-000101 / DPD01822 | 311
Advertisement
Table of Contents
