Danfoss VACON 3000 Application Manual page 255

VACON® 3000
Application Guide
7.525 (ID 4034) Speed Difference Limit
Location in the menu: P3.9.11.6
Use this parameter to set the limit (difference between successive encoder measurements) when the fault situation is noted.
7.526 (ID 4035) Speed Difference Fault Delay
Location in the menu: P3.9.11.7
Use this parameter to set the delay before the speed error is considered as a fault.
7.527 (ID 4036) Speed Delta Error Fault Response
Location in the menu: P3.9.11.5
Use this parameter to set the response of the drive to the speed measurement difference error (fault ID 1740).
7.528 (ID 4038) Output Filter
Location in the menu: P3.9.1.17
Use this parameter to set the response when the Output Filter fault is detected.
7.529 (ID 4039) Current Imbalance - Belt
Location in the menu:
• INU application: P3.9.1.19
•
AFE application: P3.8.1.13
Use this parameter to set the response when the current imbalance exceeds the threshold on the same phase between parallel
belts.
7.530 (ID 4040) Neutral to Ground Fault Response
Location in the menu:
• INU application: P3.9.1.20
• AFE application: P3.8.1.14
• BCU application: P3.6.1.10
Use this parameter to set the response when a neutral to ground fault is detected on the phase modules.
7.531 (ID 4401) STO Status
Location in the menu: P3.5.1.38
STO status feedback from STO safety relay.
7.532 (ID 5001) DC Voltage Reference
Location in the menu:
• AFE application: P3.2.3.1
Use this parameter to set the DC voltage reference. The value is given in percent of the nominal unit voltage.
7.533 (ID 5002) DC Voltage Control KP
Location in the menu:
•
AFE application: P3.2.3.2
Use this parameter to adjust the P-gain of the DC voltage controller.
7.534 (ID 5003) DC Voltage Control Time
Location in the menu:
• AFE application: P3.2.3.3
Use this parameter to adjust the integrator time constant of the DC voltage controller.
7.535 (ID 5004) Regeneration Current Limit
Location in the menu:
Danfoss A/S © 2021.09
Parameter descriptions
AB319735759636en-000101 / DPD01822 | 255