Mv-Star - Danfoss VACON 3000 Application Manual

VACON® 3000
Application Guide
Index Parameter
V5.14.1.15 Analog input 4 mode
V5.14.1.16 Analog input 5
V5.14.1.17 Analog input 5 mode
V5.14.1.18 Analog input 6
V5.14.1.19 Analog input 6 mode
V5.14.1.20 Analog input 7
V5.14.1.21 Analog input 7 mode
V5.14.1.22 Board temperature
V5.14.1.23 Supply voltage
The Unit 22 parameters are monitoring values for the DFE unit, which is only used in 12-pulse and 24-pulse drives.
Table 110: Unit 22 Parameters in the I/O and Hardware Menu
Index Parameter
V5.14.3.1 Board status
V5.14.3.2 Board temperature
V5.14.3.3 Unit temperature
V5.14.3.4 I/O

4.7.11 MV-star

Table 111: The MV-star Parameters in the I/O and Hardware Menu
Index Parameter
V5.15.1 Board status
V5.15.2 Digital inputs
V5.15.3 Digital outputs
V5.15.4 Gated relays
V5.15.5 Board temperature
V5.15.6 Supply voltage
92 | Danfoss A/S © 2021.09
Min Max Unit Default
0.00 100.00 % 0.00
0.00 100.00 % 0.00
0.00 100.00 % 0.00
-20.0 100.0 0.0
0.0 30.0 0.0
Min Max Unit
-20.0 100.0
-20.0 125.0
Min Max Unit
-20.0 100.0
0.0 30.0
ID Description
29014
Shows the mode that is set for the analog
input signal. The selection is made with a
DIP switch on the board.
1 = 0...20 mA
3 = 0...10 V
29015
29016
29017
29018
29019
29020
29021
29022
Default ID
29401
0.0 29423
0.0 29425
29426
Default ID
28951
28955
28965
28966
0.0 28923
0.0 28924
AB319735759636en-000101 / DPD01822
INU Application
Description
Description