Using The Quick Edit Function; Copying The Parameters Of An Ac Drive - Danfoss VACON 3000 Application Manual

VACON® 3000
Application Guide
RUN
4.
Push the [OK] button.

The rotation direction changes immediately. The arrow indication in the status field of the display changes.
STOP
Monitor
Parameters
Diagnostics

2.2.7.5 Using the Quick Edit Function

With the Quick Edit function, a parameter can be accessed quickly by typing the ID number of the parameter.
Procedure
1. Anywhere in the menu structure, push the [FUNCT] button.
2.
Push the arrow buttons Up and Down to select Quick Edit and accept with the [OK] button.
3.
Write the ID number of a parameter or monitoring value. Push [OK].

The display shows the parameter value in the edit mode and the monitoring value in the monitoring mode.

2.2.8 Copying the Parameters of an AC Drive

Use this function to copy parameters from a drive to another. Before downloading parameters from the control panel to the drive,
stop the drive.
This function is available only in the graphical display.
Procedure
1. Save the parameters to the control panel.
a. Go into the User settings menu.
Danfoss A/S © 2021.09
READY Keypad
Choose action
ID:1805
Reverse
Forward
READY I/O
Main Menu
ID: M1
( 7 )
( 15 )
( 6 )
N O T I C E
User Interfaces
AB319735759636en-000101 / DPD01822 | 19