Danfoss VACON 3000 Application Manual page 259

VACON® 3000
Application Guide
Selection number Selection name
15 Precharge permissive
16 GSW unlock
17 Run cooling
18 Close breaker
19 STO active
20 Pulse close breaker
21 Pulse open breaker
7.559 (ID 6041) RO2 Function
Location in the menu:
• INU application: P3.5.3.6.2
•
AFE application: P3.5.3.6.2
Use this parameter to select a function or a signal that is connected to the relay output. See
7.560 (ID 6042) RO3 Function
Location in the menu:
• INU application: P3.5.3.6.3
• AFE application: P3.5.3.6.3
Use this parameter to select a function or a signal that is connected to the relay output. See
7.561 (ID 6400) FB DataIn 1 Selection
Location in the menu:
• INU application: P3.6.17
•
AFE application: P3.6.17
•
BCU application: P3.5.17
Use this parameter to select the fieldbus controlled data with the ID number of the parameter.
7.562 (ID 6401) FB DataIn 2 Selection
Location in the menu:
• INU application: P3.6.18
• AFE application: P3.6.18
• BCU application: P3.5.18
Use this parameter to select the fieldbus controlled data with the ID number of the parameter.
7.563 (ID 6402) FB DataIn 3 Selection
Location in the menu:
•
INU application: P3.6.19
• AFE application: P3.6.19
• BCU application: P3.5.19
Use this parameter to select the fieldbus controlled data with the ID number of the parameter.
7.564 (ID 6403) FB DataIn 4 Selection
Location in the menu:
Danfoss A/S © 2021.09
Description
The permission to start the precharge operation is given.
–
–
–
–
–
–
Parameter descriptions
7.558 (ID 6040) RO1 Function.
7.558 (ID 6040) RO1 Function.
AB319735759636en-000101 / DPD01822 | 259