Danfoss VACON 3000 Application Manual page 235

VACON® 3000
Application Guide
7.365 (ID 3335) KPC Open Timeout
Location in the menu:
• INU application: P3.17.4.6
• AFE application: P3.3.4.6
Use this parameter to set the maximum open response time for the precharge contactor.
7.366 (ID 3336) Minimum Slew Rate Timeout
Location in the menu:
• INU application: P3.17.4.7
• AFE application: P3.3.4.7
Use this parameter to set the delay until the test for the minimum precharge slew rate.
7.367 (ID 3337) DC Discharge Timeout
Location in the menu:
• INU application: P3.17.4.8
• AFE application: P3.3.4.8
Use this parameter to set the maximum DC-link discharge time.
7.368 (ID 3338) DC Precharge Timeout
Location in the menu:
• INU application: P3.17.4.9
• AFE application: P3.3.4.9
Use this parameter to set the maximum time to try the precharge operation.
7.369 (ID 3339) Activate Timeout
Location in the menu:
• INU application: P3.17.4.10
• AFE application: P3.3.4.10
Use this parameter to set the fixed delay from the drive initialization until the precharge is permitted.
7.370 (ID 3340) Synch Timeout
Location in the menu:
• AFE application: P3.3.4.11
Use this parameter to set the maximum duration for which the AFE is allowed to synchronize.
7.371 (ID 3341) Stabilize Timeout
Location in the menu:
• AFE application: P3.3.4.12
Use this parameter to set the maximum duration by which the AFE must attain DC regulation.
7.372 (ID 3342) KPC Close Timeout
Location in the menu:
•
INU application: P3.17.4.11
• AFE application: P3.3.4.13
Use this parameter to set the maximum close response time for the precharge contactor.
7.373 (ID 3343) Cooling Off Delay
Location in the menu:
Danfoss A/S © 2021.09
Parameter descriptions
AB319735759636en-000101 / DPD01822 | 235