Danfoss VACON 3000 Application Manual page 211

VACON® 3000
Application Guide
Use this parameter to select the data that is sent to the fieldbus with the ID number of the parameter or monitor value.
The data is scaled to an unsigned 16-bit format according to the format on the control panel. For example, value 25.5 on the display
equals 255.
7.203 (ID 857) FB DataOut 6 Selection
Location in the menu:
• INU application: P3.6.6
• AFE application: P3.6.6
• BCU application: P3.5.6
Use this parameter to select the data that is sent to the fieldbus with the ID number of the parameter or monitor value.
The data is scaled to an unsigned 16-bit format according to the format on the control panel. For example, value 25.5 on the display
equals 255.
7.204 (ID 858) FB DataOut 7 Selection
Location in the menu:
• INU application: P3.6.7
•
AFE application: P3.6.7
•
BCU application: P3.5.7
Use this parameter to select the data that is sent to the fieldbus with the ID number of the parameter or monitor value.
The data is scaled to an unsigned 16-bit format according to the format on the control panel. For example, value 25.5 on the display
equals 255.
7.205 (ID 859) FB DataOut 8 Selection
Location in the menu:
• INU application: P3.6.8
• AFE application: P3.6.8
• BCU application: P3.5.8
Use this parameter to select the data that is sent to the fieldbus with the ID number of the parameter or monitor value.
The data is scaled to an unsigned 16-bit format according to the format on the control panel. For example, value 25.5 on the display
equals 255.
7.206 (ID 889) Fieldbus Start Logic
Location in the menu:
• INU application: P3.2.8
•
AFE application: P3.4.6
•
BCU application: P3.3.7
Use this parameter to set the fieldbus start logic. The selections can include the word 'edge' to help you prevent an accidental start.
Selection number
0
1
7.207 (ID 890) FB DataOut 9 Selection
Location in the menu:
• INU application: P3.6.9
• AFE application: P3.6.9
• BCU application: P3.5.9
Use this parameter to select the fieldbus controlled data with the ID number of the parameter.
Danfoss A/S © 2021.09
Selection name
A rising edge is necessary
State
Parameter descriptions
Description
AB319735759636en-000101 / DPD01822 | 211