Drive Info; I/O And Hardware Menu; Basic I/O - Danfoss VACON 3000 Application Manual

VACON® 3000
Application Guide

5.6.3 Drive Info

Table 175: The Drive Info Parameters in the Diagnostics Menu
Index Parameter
V4.7.1 Power Size
5.6.4 Unit Status
Table 176: The Unit Status Parameters in the Diagnostics Menu
Index Parameter
V4.8.1 Control Unit
V4.8.2 UNIT1
V4.8.3–19 UNIT2–29

5.7 I/O and Hardware Menu

5.7.1 Basic I/O

Table 177: The Basic I/O Parameters in the I/O and Hardware Menu
Index Parameter
V5.1.1 Digital Input 1
V5.1.2 Digital Input 2
V5.1.3 Digital Input 3
V5.1.4 Digital Input 4
V5.1.5 Digital Input 5
V5.1.6 Digital Input 6
V5.1.7 Analogue Input 1
Mode
V5.1.8 Analogue Input 1
V5.1.9 Analogue Input 2
Mode
V5.1.10 Analogue Input 2
V5.1.11 Analogue Output 1
Mode
Danfoss A/S © 2021.09
Min Max
Min Max Unit Default
Min Max Unit
0 1
0 1
0 1
0 1
0 1
0 1
1 3
0 100 %
1 3
0 100 %
1 3
Unit Default
ID
2540
2541
Defined based on connected power units
Default ID Description
0 2502 Status of the digital input signal
0 2503 Status of the digital input signal
0 2504 Status of the digital input signal
0 2505 Status of the digital input signal
0 2506 Status of the digital input signal
0 2507 Status of the digital input signal
3 2508
Shows the mode that is set for the analog input signal.
The selection is made with a DIP switch on the control
board.
1 = 0...20mA
3 = 0...10V
0.00 2509 Status of the analog input signal
3 2510
Shows the mode that is set for the analog input signal.
The selection is made with a DIP switch on the control
board.
1 = 0...20mA
3 = 0...10V
0.00 2511 Status of the analog input signal
1 2512
Shows the mode that is set for the analog input signal.
The selection is made with a DIP switch on the control
board.
1 = 0...20mA
3 = 0...10V
AFE Application
ID Description
Description
Status of the control unit
Status of the power unit
Status of the power unit
AB319735759636en-000101 / DPD01822 | 127