Danfoss VACON 3000 Application Manual page 275

VACON® 3000
Application Guide
8.2.6.12 Fault Code 8, ID 614 - System Fault
Cause
• Configuration error.
• Software error.
• Defective component (a defective control board).
• Operation malfunction.
Troubleshooting
• Reset the fault and restart.
• Download the latest software from the Danfoss Drives website. Update the drive with it.
• If the fault occurs again, ask for instructions from your nearest distributor.
8.2.6.13 Fault Code 8, ID 615 - System Fault
Cause
• Powerbus high-speed process data failure.
• Error in the communication between two power units.
Troubleshooting
• Reset the fault and restart.
• Download the latest software from the Danfoss Drives website. Update the drive with it.
• If the fault occurs again, ask instructions from your nearest distributor.
8.2.6.14 Fault Code 8, ID 616 - System Fault
Cause
• Powerbus high-speed socket communication failure.
• Error in the communication between two power units.
Troubleshooting
• Reset the fault and restart.
• Download the latest software from the Danfoss Drives website. Update the drive with it.
• If the fault occurs again, ask instructions from your nearest distributor.
8.2.6.15 Fault Code 8, ID 618 - System Fault
Cause
• Powerbus high-speed link error.
• Error in the communication between two power units.
Troubleshooting
• Reset the fault and restart.
• Download the latest software from the Danfoss Drives website. Update the drive with it.
• If the fault occurs again, ask instructions from your nearest distributor.
8.2.6.16 Fault Code 8, ID 620 - System Fault
Cause
• Gate driver board error A.
Troubleshooting
• Reset the fault and restart.
• Download the latest software from the Danfoss Drives website. Update the drive with it.
• If the fault occurs again, ask instructions from your nearest distributor.
Danfoss A/S © 2021.09
Fault tracing
AB319735759636en-000101 / DPD01822 | 275