Danfoss VACON 3000 Application Manual page 146

VACON® 3000
Application Guide
• INU application: V2.8.8.7
• AFE application: V2.8.7.7
• BCU application: V2.5.6.7
This monitoring value shows the raw value of the process data in a 32-bit signed format.
6.62 (ID 883) FB Data IN 8
Location in the menu:
•
INU application: V2.8.8.8
•
AFE application: V2.8.7.8
•
BCU application: V2.5.6.8
This monitoring value shows the raw value of the process data in a 32-bit signed format.
6.63 (ID 1101) Maintenance Counter 1
Location in the menu:
• AFE application: V2.7.1
This monitoring value shows the status of the maintenance counter. The status of the maintenance counter is shown as revolutions
multiplied by 1000, or in hours. For the configuration and activation of this counter, see
6.64 (ID 1172) Fault Word 1
Location in the menu:
• Standard application: V2.6.15
This monitoring value shows the bit-coded status of the Fault Word 1.
6.65 (ID 1173) Fault Word 2
Location in the menu:
• Standard application: V2.6.16
This monitoring value shows the bit-coded status of the Fault Word 2.
6.66 (ID 1495) Frequency Reference Source
Location in the menu:
•
Standard application: V2.6.8
This monitoring value shows the momentary frequency reference source.
6.67 (ID 3007) Encoder HW Fallback Count
Location in the menu:
• Standard application: V2.10.1
This monitoring value shows the encoder HW fallback count.
6.68 (ID 3008) Encoder SW Fallback Count
Location in the menu:
•
Standard application: V2.10.2
This monitoring value shows the encoder SW fallback count.
6.69 (ID 3050) Encoder Status Word
Location in the menu:
• Standard application: V2.10.3.1
This monitoring value shows the bit-coded status of the encoder channel A.
6.70 (ID 3051) Encoder Glitch Count
Location in the menu:
146 | Danfoss A/S © 2021.09
Monitoring value descriptions
7.239 (ID 1104) Counter 1 Mode.
AB319735759636en-000101 / DPD01822