Danfoss VACON 3000 Application Manual page 241

VACON® 3000
Application Guide
• INU application: P3.17.2.2.18
• AFE application: P3.3.2.2.12
Use this parameter to select the digital input signal for the grounding switch closed position 1 status.
7.412 (ID 3615) Grounding Switch Closed 2
Location in the menu:
• INU application: P3.17.2.2.19
•
AFE application: P3.3.2.2.13
Use this parameter to select the digital input signal for the grounding switch closed position 2 status.
7.413 (ID 3616) Grounding Switch Closed 3
Location in the menu:
• INU application: P3.17.2.2.20
• AFE application: P3.3.2.2.14
Use this parameter to select the digital input signal for the grounding switch closed position 3 status.
7.414 (ID 3617) Grounding Switch Closed 4
Location in the menu:
• INU application: P3.17.2.2.21
•
AFE application: P3.3.2.2.15
Use this parameter to select the digital input signal for the grounding switch closed position 4 status.
7.415 (ID 3618) UFES Test 1
Location in the menu:
• AFE application: P3.3.2.2.16
Use this parameter to select the digital input signal for the UFES test mode status.
• Active = UFES is in test mode and power-up is not allowed.
7.416 (ID 3619) UFES Test 2
Location in the menu:
• AFE application: P3.3.2.2.17
Use this parameter to select the digital input signal for the UFES test mode status.
• Active = UFES is in test mode and power-up is not allowed.
7.417 (ID 3620) UFES Test 3
Location in the menu:
• AFE application: P3.3.2.2.18
Use this parameter to select the digital input signal for the UFES test mode status.
• Active = UFES is in test mode and power-up is not allowed.
7.418 (ID 3621) UFES Test 4
Location in the menu:
• AFE application: P3.3.2.2.19
Use this parameter to select the digital input signal for the UFES test mode status.
• Active = UFES is in test mode and power-up is not allowed.
7.419 (ID 3624) Interlock NC 1
Location in the menu:
Danfoss A/S © 2021.09
Parameter descriptions
AB319735759636en-000101 / DPD01822 | 241