Danfoss VACON 3000 Application Manual page 251

VACON® 3000
Application Guide
By default, humidity is OK when the signal is active. To invert the signal, so that humidity is OK when the signal is inactive, use
parameter ID 3736.
7.491 (ID 3724) Enclosure Temperature Status 1.1
Location in the menu:
•
INU application: P3.17.2.2.71
•
AFE application: P3.3.2.2.81
Use this parameter to select the digital input signal for the temperature status of the enclosure.
By default, temperature is OK when the signal is active. To invert the signal, so that temperature is OK when the signal is inactive,
use parameter ID 3736.
7.492 (ID 3725) Enclosure Temperature Status 1.2
Location in the menu:
• INU application: P3.17.2.2.72
• AFE application: P3.3.2.2.82
Use this parameter to select the digital input signal for the temperature status of the enclosure.
By default, temperature is OK when the signal is active. To invert the signal, so that temperature is OK when the signal is inactive,
use parameter ID 3736.
7.493 (ID 3726) Enclosure Temperature Status 1.3
Location in the menu:
• INU application: P3.17.2.2.73
• AFE application: P3.3.2.2.83
Use this parameter to select the digital input signal for the temperature status of the enclosure.
By default, temperature is OK when the signal is active. To invert the signal, so that temperature is OK when the signal is inactive,
use parameter ID 3736.
7.494 (ID 3727) Enclosure Temperature Status 2.1
Location in the menu:
•
INU application: P3.17.2.2.74
•
AFE application: P3.3.2.2.84
Use this parameter to select the digital input signal for the temperature status of the enclosure.
By default, temperature is OK when the signal is active. To invert the signal, so that temperature is OK when the signal is inactive,
use parameter ID 3736.
7.495 (ID 3728) Enclosure Temperature Status 2.2
Location in the menu:
• INU application: P3.17.2.2.75
• AFE application: P3.3.2.2.85
Use this parameter to select the digital input signal for the temperature status of the enclosure.
By default, temperature is OK when the signal is active. To invert the signal, so that temperature is OK when the signal is inactive,
use parameter ID 3736.
7.496 (ID 3729) Enclosure Temperature Status 2.3
Location in the menu:
• INU application: P3.17.2.2.76
• AFE application: P3.3.2.2.86
Use this parameter to select the digital input signal for the temperature status of the enclosure.
By default, temperature is OK when the signal is active. To invert the signal, so that temperature is OK when the signal is inactive,
use parameter ID 3736.
Danfoss A/S © 2021.09
Parameter descriptions
AB319735759636en-000101 / DPD01822 | 251