Table of Contents
Advertisement
Configuration Files
The mapping of specific signals to logic analyzer channels depends on:
•
•
•
Because of these dependencies, there is no single logic analyzer configuration file setup, and no
configuration file is supplied with the probes. The logic analyzer Buses/Signals setup dialog will allow
you to assign descriptive labels to each analyzer channel that associate each channel with the
particular DRAM and DRAM signal being probed.
Configuration files are provided with the Keysight B4621A decoder and B4622A protocol compliance
software.
Configuration files will also set up the DDR bus decoder, trigger tool, and other software tools.
To save a configuration file
After you set up the logic analyzer, it is strongly recommended that you save the configuration.
To save your work, select File>Save As... and save the configuration as an ALA format file.
ALA format configuration files are more complete and efficient than XML format configuration files.
See the logic analyzer online help for more information on these formats.
Keysight W2630 Series DDR2 DRAM BGA Probes Installation Guide
Which DRAMs on a DIMM are probed.
Which probe you are using.
How the single ended logic analyzer cable adapters are arranged when connecting to the DDR2
DRAM BGA probe.
Setting Up the Logic Analysis System
3
35
Advertisement
Table of Contents
