To Save Measurement Results Into Usb Memory - Keysight E4980A User Manual

Save/Recall
Saving Measurement Results into USB Memory

To save measurement results into USB memory:

For how to save the measurement result, refer to
measurement result of List Sweep Measurement to USB memory." on
page
Step 1. Plug a USB memory stick into the front USB port.
Step 2. Press [Save/Recall].
Step 3. Press the SAVE DATA softkey.
Step 4. Press the START LOG softkey and then press the following softkeys to enter
the measurement results into the data buffer memory.
Softkey
START LOG
SAVE &
STOP
Step 5. Start measurement. The data buffer memory is filled with up to 201 sets of
measurement results.
Step 6. Press the SAVE & STOP softkey to save results into the USB memory.
Step 7. When the data has been saved into the USB memory, a "Storing data
completed. : E498xXXX.csv" message appears in the system message area.
Keysight E4980A/AL Precision LCR Meter
182.
Description
Starts logging the measurement results into the data buffer memory.
Copies the data from the data buffer memory into the USB memory.
Then stops saving the measurement results into the data buffer
memory and clears the data buffer memory.
"How to save the
181