Making The External Air Connection; Making The Power Cable Connection - Stratasys FORTUS 360mc Manual

Making the External Air Connection

The external air connector is located in the lower left corner of the back panel.
(Figure 2-3)
External Air Connector

Making the Power Cable Connection

Warning: A licensed electrician must perform all wiring from
service connect to the transformer, and from the transformer
to the system - including all connectors, cables and proper
strain relief.
This system requires a high voltage connection, which is made at the right,
rear corner of the system (as viewed from the rear). High voltage is applied to
the system via a Delta connection. The main breaker must be off until a
Stratasys Service Technician has verified the connection. This system is only
provided with a Delta connection.
High Voltage Power Cable Connection
2-2
FORTUS 360mc/400mc and FDM 360mc/400mc User Guide
Figure 2-2: Network Connection
RJ45 Connector
Figure 2-3: External Air Connection
(Figure
Figure 2-4: Power Cable Connection
2-4)
Main Circuit Breaker
High Voltage Power Cable Connection
UPS Switch