As Needed Maintenance
Recoater Blade Air Flow Control Valve, Breather Vent, and
Cap
Procedure
1. Power OFF the printer. See
2. The air flow control valve, breather vent and cap are threaded into the top of the recoater
blade. Unscrew the components to remove.
Recoater Blade Air Flow Control Valve, Breather Vent, and Cap
"Powering OFF the Printer" (page
Figure 26: Recoater Blade Valve, Vent, and Cap
© Copyright 2020 Stratasys. All rights reserved.
73).
Page 126