Liquefier Tips - Stratasys Fortus 360mc User Manual

Table 3-1: Material Build Temperatures
Material
ABSi
ABS-M30
ABS-M30i
ABS-ESD7
ASA
Nylon 12
PC-ABS
PC
PC-ISO
Ultem* 9085
Ultem 1010
PPSF
Note:
All materials use the same canister type. Extrusion and oven
temperatures are automatically set by the modeler.
MATERIALS COMPATIBILITY
System/Material compatibility can be found in
depend on options purchased with the system. See
360mc and 400mc systems.

LIQUEFIER TIPS

LIQUEFIER TIPS AND SLICE HEIGHTS
Two types of liquefier tips are available. Standard tip tips are used for all modeling materials and for Break-Away
Supports (BASS) materials, and soluble tips are used for soluble support materials. When modeling with
materials that use soluble release support material (SR), use the T12SR20, T12SR30, or T12SR100 tip for the
support material.
• There are eight tips available: T10, T12, T12SR20, T12SR30, T12SR100, T14 T16, and T20.
• Tips are a replaceable consumable item. To change tips, see
page 47.
• Tips must be changed when the material type is changed.
Maximum
Extrusion Temp.
330°C (626°F)
320°C (609°F)
320°C (609°F)
330°C (626°F)
355°C (671°F)
330°C (626°F)
365°C (689°F)
400°C (752°F)
410°C (770°F)
415°C (779°F)
"Tip Compatibility & Selection" on page
Maximum
Oven Temp.
85°C (185°F)
95°C (203°F)
95°C (203°F)
100°C (212°F)
120°C (248°F)
110°C (230°F)
145°C (293°F)
190°C (374°F)
225°C (437°F)
225°C (437°F)
Available Options for material options available to the
"Changing Tips or Material Type" on
18
19. Materials available