System, Material, and Liquefier Tip
Compatibility
ABS (P400)
Use ABS model material with ABS_SS support material. The following tip
combinations and slice heights are available:
FDM Vantage and FDM Titan
Model Tip
Support Tip
T10
T12 WW
T12
T12 WW
T16
T12 WW
T20
T20
ABS-ESD7
ABS-ESD7 material is available for Fortus 400mc, and Fortus 900mc systems.
Use ABS-ESD7 model material with SR-30 support material. The following tip
combinations and slice heights are available:
Fortus 400mc and 900mc
ABS-ESD7
Model Tip
T12
T16
ABS-M30 (P430), ABS-M30i*
*ABS-M30i is available on the Fortus eT, Fortus 400mc and Fortus 900mc.
ABS-M30 and ABS-M30i material are available on Fortus eV, Fortus eT, Fortus
360mc/400mc, and Fortus 900mc systems.
C-2
FORTUS 360mc/400mc and FDM 360mc/400mc User Guide
Slice Height
0.005 in.
(0.127 mm)
0.007 in.
(0.178 mm)
0.010 in.
(0.254 mm)
0.013 in.
(0.330 mm)
Support Tip
Slice Height
T12 SR-30
0.007 in. (0.178 mm)
T12 SR-30
0.010 in. (0.254 mm)
FDM Maxum
Model Tip
Support Tip
T10
T10
T12
T12
T16
T16
Slice Height
0.005 in.
(0.127 mm)
0.007 in.
(0.178 mm)
0.010 in.
(0.254 mm)