Table of Contents
Advertisement
Stratasys ProBleacher Product Guide
Specifications
Unpacking
1. Open the top flaps of the outer box.
2. Remove the foam corner protectors, and keep them for future use.
3. Remove the power cord from the box.
4. Remove the inner box.
5. Open the inner box top flaps. There is an orange Important insert inside the inner box.
Model
Power Input
Frequency
Ambient Temperature
Relative Humidity
LED Output
LED Wavelength
Unit Size
Chamber Size
Unit Weight
Shipping Size
Shipping Weight
•
Open the packaging carefully and store it for future use. Original packaging is
required should this product need warranty repair or replacement.
•
This product is shipped in two boxes, a box within a box, to ensure it arrives
undamaged. It is recommended to unpack with 2 people.
Verify that the plug is suitable for your location. If not, purchase a cable locally.
Important:
This insert contains important safety information and you must read it thoroughly prior
to using this product.
© Copyright 2021 Stratasys. All rights reserved.
115V
110-120V
50-60 Hz
10-30⁰C / 50-86⁰F
30-70% (non-condensing)
9 Watts
450-560 nm
30.5 x 30.5 x 26 cm / 12 x 12 x 10.25 in.
30.5 x 30.5 x 16 cm / 12 x 12 x 6.25 in.
10 kg / 22 lbs
41 x 41 x 36 cm / 16 x 16 x 14 in.
11.4 kg / 25 lbs
Specifications
230V
220-240V
Page 5
Advertisement
Table of Contents
