Viewing Hardware Health Monitoring (Hhm) Data - Spectra Logic T-Series Spectra T200 User Manual

Chapter 11 — Library Troubleshooting

Viewing Hardware Health Monitoring (HHM) Data

The advanced utility called HHM: View Data generates a report showing
the current status of the HHM counters. This information includes
information about the following:
In addition to the HHM: View Data utility, two additional HHM utilities configure
Caution
the HHM counters and thresholds for the monitored components. Do not change
the values for any counters or thresholds unless specifically instructed to do so by
SpectraGuard Support.
Use the following steps to view the current HHM data.
1. Log into the library with superuser or administrator privileges.
2. Select Maintenance > Tools > Utilities. The Utilities screen displays.
3. If you want to save the HHM report to a USB key, insert the USB key
4. Select Show Advanced. The Advanced Utilities Confirmation screen
5. Select Next. The Utilities screen refreshes to show a list of the advanced
244
User Guide
Library serial number and name (if configured)
Information about key library components monitored by HHM,
including the type of reminder generated when the component reaches
its maintenance threshold
Transporter moves: Drive To Drive Moves, Drive To Slot Moves, Slot To
Slot Moves, Slot To Drive Moves, Tap In Moves, and Tap Out Move.
into the LCM's USB port; otherwise, skip to the next step.
Note: The option to save the HHM report to USB is only displayed if
you plug a USB key in to the LCM's USB port before you select
Show Advanced.
displays.
utilities.
91090000