How To Set Warm-Up Time For Fixing Assembly When Fixing Error Occurs Due To Low Temperature Environment Or Using Out Of Specification Paper; How To Change Fixing Control Temperature - Canon imagePRESS C800 Series Troubleshooting Manual

Chapter 1
FL2-8925 GLASS, DUST-PROOF
FL2-4425 CLEANING PAD UNIT
1.1.7.1.42 How to set warm-up time for Fixing Assembly when fixing error occurs due to low temperature environment or
using out of specification paper
[ Manual-related ]
Description
If the fixing error occurred at first power-on when in the low temperature environment or using out of specification paper, the warm-up time for Fixing Assembly
can be changed by the following method.
Field Remedy
After selecting and setting from service mode > COPIER > Option > IMG-FIX > FX-WUT (Setting the Fixing Assembly warm-up time), turn OFF and then ON
the main power switch.
The range of settings is as follows.
- 0: Initial value (Default)
- 1: Initial value + 60 seconds
- 2: Initial value + 120 seconds
- 3: Initial value + 180 seconds

1.1.7.1.43 How to change fixing control temperature

[ Manual-related ]
Description
Please explain how to adjust the fixing control temperature by the paper type.
Field Remedy
Select service mode > COPIER > COPIER > Option > IMG-FIX > press items for each paper type, and then press OK key.
1-130
0031-6189
0031-6190