Siemens SINUMERIK 840D sl Series Diagnostics Manual page 249

08/2005
Program Con- Clear alarm with NC START or RESET key and continue the program.
tinuation:
15300
Channel %1 block %2 invalid number-of-passed-blocks during block search
Parameters: %1 = Channel number
%2 = Block number, label
Definitions: In the function "Block search with calculation" a negative number of passes has been
entered in column P (number of passes). The permissible range of values is P 1 - P 9 999.
Reactions: - Alarm display.
Remedy: Enter only positive number of passes within the range of values.
Program Con- Clear alarm with the Delete key or NC START.
tinuation:
15310
Channel %1 block %2 file requested during block search is not available
Parameters: %1 = Channel number
%2 = Block number, label
Definitions: During block search, a target has been specified with a program that has not been
loaded.
Reactions: - Alarm display.
Remedy: Correct the specified search target accordingly or reload the file.
Program Con- Clear alarm with the Delete key or NC START.
tinuation:
15320
Channel %1 block %2 invalid block search command
Parameters: %1 = Channel number
%2 = Block number, label
Definitions: The block search command (type of search target) is smaller than 1 or greater than 5. It is
entered in column type of the block search window. The following block search orders are
allowed.
Type Meaning
1 Search for block number
2 Search for label
3 Search for string
4 Search for program name
5 Search for line number in a file
Reactions: - Alarm display.
Remedy: Modify the block search command.
Program Con- Clear alarm with the Delete key or NC START.
tinuation:
15330
Channel %1 block %2 invalid block number as search target
Parameters: %1 = Channel number
%2 = Block number, label
Definitions: Syntax error! Positive integers are allowed as block numbers. Block numbers must be
preceded by ":" and subblocks by an "N".
Reactions: - Alarm display.
Remedy: Repeat the input with corrected block number.
Program Con- Clear alarm with the Delete key or NC START.
tinuation:
15340
Channel %1 block %2 invalid label as search target
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
Overview of Alarms
2-249