Siemens SINUMERIK 840D sl Series Diagnostics Manual page 965

08/2005
No. 79
Explanation Clear marker (NC_block: CLEARM).
Not allowed if -
Remedy -
No. 80
Explanation Selection of an NC block (PI command)
Not allowed if -
Remedy -
No. 81
Explanation Disable the NC program which is currently being processed for editing (PI command)
Not allowed if -
Remedy -
No. 82
Explanation Start a program in the TEACH IN submode (VDI signal: NC Start).
Not allowed if See 33 and 5
Remedy -
No. 83
Explanation Start a program in the TEACH IN submode (VDI signal: NC Start).
Not allowed if See 33 and 5
Remedy -
No. 84
Explanation Reorganize block processing
Not allowed if -
Remedy -
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
List of Action Numbers
3-965