Siemens SINUMERIK 840D sl Series Diagnostics Manual page 557

08/2005
Definitions: --
Remedy: --
101200
Safety Integrated data copied
Definitions: The SI data copying function was successfull.
Remedy: --
101201
Safety Integrated data confirmed
Definitions: The SI data confirmation function was successfull.
Remedy: --
101202
Copying SI data from axis %1 to drive %2
Parameters: %1 = Axis name
%2 = Drive number
Definitions: This message is output during the SI data copying function.
Remedy: --
101203
SI data not copied completely
Definitions: An error occurred during the SI data copying function; this caused the SI data to be cop-
ied incompletely or not at all.
Remedy: --
101204
SI data not confirmed
Definitions: The SI data confirmation function was not executed because an error occurred during the
processing.
Remedy: --
101205
Drive data changed? -> Don't forget to save bootfiles!
Definitions: When exiting the drive machine data images, the operator is reminded to save the boot
files so that drive machine data that may have been changed is not lost.
Remedy: --
101206
Search operation in progress, please wait ...
Definitions: The search function was initiated in the machine data images.
Remedy: --
101207
Positioning to %1...
Parameters: %1 = --
Definitions: A list image, e.g. general machine data, was selected.
The MMC100 attempts to position at the datum selected last in this image.
Remedy: --
101208
SI data are confirmed: axis %1
Parameters: %1 = --
Definitions: In the start-up area the function "Confirm Safety Integrated Data" has been started.
The message was output during this function in order to provied the user with an acknowl-
edgement regarding the operation of the function.
Remedy: --
101209
SI data are confirmed: drive %1
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
Overview of Alarms
2-557