Siemens SINUMERIK 840D sl Series Diagnostics Manual page 971

08/2005
No. 116
Explanation Activate tool-management commands (Ch. VDI signal).
Not allowed if The NCK channel is in a state other than "ready".
Remedy Abort the program or process with the Reset key or wait for end of program.
No. 117
Explanation Deactivate tool-management commands (Ch. VDI signal).
Not allowed if The NCK channel is in a state other than "ready".
Remedy Abort the program or process with the Reset key or wait for end of program.
No. 118
Explanation Selection of desired safety limitations (SGE) (always allowed).
Not allowed if -
Remedy -
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
List of Action Numbers
3-971