Siemens SINUMERIK 840D sl Series Diagnostics Manual page 598

Overview of Alarms
Definitions: The operator is prompted to replace the specified swivel head in the spindle with the new
swivel head.
Reactions: - Alarm display.
Remedy: Exchange swivel head.
When doing this, please follow the machine manufacturer's instructions.
Program Con- Internal
tinuation:
112326
Set inclinable head%n%1%2
Definitions: The operator is prompted to set the swivel head in accordance with the specified data.
Reactions: - Alarm display.
Remedy: Set swivel head.
When doing this, please follow the machine manufacturer's instructions.
Program Con- Internal
tinuation:
112327
Angle not in allowed area:%n%1%2
Definitions: The programmed machining cannot be carried out with the swivel head.
Reactions: - Alarm display.
Remedy: If necessary, clamp the workpiece differently.
Program Con- Internal
tinuation:
112328
Angle adapted to angle grid:%n%1%2
Definitions: Due to the angle grid, the swivel head could not be set exactly to the specified angle.
Reactions: - Alarm display.
Remedy: Machining can be continued with the specified values, but it will not correspond exactly to
the programming.
Program Con- Internal
tinuation:
112329
Set inclinable head/swivel table:%n%1%2
Definitions: The operator is prompted to set the swivel head/table in accordance with the specified
data.
Reactions: - Alarm display.
Remedy: Set swivel head/table.
When doing this, please follow the machine manufacturer's instructions.
Program Con- Internal
tinuation:
112330
Set swivel table:%n%1%2
Definitions: The operator is prompted to set the swivel table in accordance with the specified data.
Reactions: - Alarm display.
Remedy: Set swivel table.
When doing this, please follow the machine manufacturer's instructions.
Program Con- Internal
tinuation:
112340
Approval not possible, as axes have not%nbeen referenced!
Definitions: In Safety Integrated a user acknowledgement can only be made after the reference point
has been approached.
2-598
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
© Siemens AG, 2005. All rights reserved
08/2005