Siemens SINUMERIK 840D sl Series Diagnostics Manual page 562

Overview of Alarms
As of SW 4.1: The faulty entry is retained, and the cursor remains at the field.
103010
Invalid file name
Definitions: The file name entered:
Must not have more than 32 characters (letters, digits, underscore; including the block
and program ID:_N_ and _MPF), amounts to 25 assignable characters.
Cannot have any separators (e.g. /).
Must have letters at the first and second position.
Remedy: --
103011
No program selected - block search ended
Definitions: At the moment, no program is selected, therefore, no search run is possible.
Remedy: Select a program.
103012
Safety function not active
Definitions: --
Remedy: --
103013
No agreement could be given
Definitions: --
Remedy: --
103014
Please first reference axis
Definitions: The reference point approach was not yet performed or finished.
Remedy: Perform reference point approach.
103015
Caution! Dimension system is changed from inch to metric
Definitions: --
Remedy: --
103016
Caution! Dimension system is changed from metric to inch
Definitions: --
Remedy: --
103017
Scratching impossible due to rotation in %1
Parameters: %1 = --
Definitions: --
Remedy: --
103018
Swivel: Adjustment terminated
Definitions: --
Remedy: --
103019
Swivel: Adjustment not possible
Definitions: --
Remedy: --
104000
Actual tool not found
Definitions: If the cursor in the window "Magazine list" is at a blank line, then no tool will be found after
pressing the softkey "Tool data".
2-562
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
© Siemens AG, 2005. All rights reserved
08/2005