Sorter; Adjust - Canon imagePRESS 1135 Series Service Manual

SORTER

ADJUST

SORTER> ADJUST
PNCH-Y Adj of punch hole side rgst pstn: Fin-AG
Lv.1 Details To adjust the punch hole in side registration direction.
As the value is increased by 1, punch hole moves by 0.45 mm.
+: toward rear
-: toward front
Use case If the punch hole misalign in the side registration direction
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range -5 to 5
Unit 0.45 mm
Default value 0
CV-REG-L Adj of large cover rgst positin: trimmer
Lv.1 Details To adjust the side registration position of cover sheet with 298 mm or
more in depth.
As the value is increased by 1, the cover sheet moves by 0.1 mm.
+: toward front
-: toward rear
Use case When the cover sheet is displaced toward front or rear
Display/adj/set range -50 to 50
Unit 0.1 mm
Default value 0
CV-REG-S Adj of small cover rgst positin: trimmer
Lv.1 Details To adjust the side registration position of cover sheet with less than
298 mm in depth.
As the value is increased by 1, the cover sheet moves by 0.1 mm.
+: toward front
-: toward rear
Use case When the cover sheet is displaced toward front or rear
Display/adj/set range -50 to 50
Unit 0.1 mm
Default value 0
CV-CENT Adj of cover pstn in feed way: trimmer
Lv.1 Details To adjust the cover position in feed direction.
As the value is increased by 1, the cover sheet moves by 0.1 mm.
+: toward delivery side
-: toward inlet
Use case When the cover sheet is displaced in right or left direction
Display/adj/set range -50 to 50
Unit 0.1 mm
Default value 0
8
Service Mode > SORTER > ADJUST
8 Service Mode > SORTER > ADJUST
SORTER> ADJUST
CLCT-SB Acmltn switch back mvmnt amnt adj:trimmr
Lv.1 Details To adjust the amount to push-on the inner sheet to the reference wall
of the integration unit.
As the value is increased by 1, push-on amount changes by 0.1 mm
(setting value of 0 is equivalent to 10 mm).
+: increase
-: decrease
Use case • When the displacement or damage occurs on the paper stack
• When there are one or more missing pages
Display/adj/set range -50 to 50
Unit 0.1 mm
Default value 0
ALG-F-A4 Adj frnt align plate shift(small) trimmr
Lv.1 Details To adjust the push-on amount of front alignment plate when aligning
the inner sheets with less than 298 mm in depth.
As the value is increased by 1, push-on amount changes by 0.1 mm.
+: increase
-: decrease
Use case When the alignment is displaced in horizontal direction
Display/adj/set range -30 to 30
Unit 0.1 mm
Default value 0
ALG-R-A4 Adj rear align plate shift(small) trimmr
Lv.1 Details To adjust the push-on amount of rear alignment plate when aligning
the inner sheets with less than 298 mm in depth.
As the value is increased by 1, push-on amount changes by 0.1 mm.
+: increase
-: decrease
Use case When the alignment is displaced in horizontal direction
Display/adj/set range -30 to 30
Unit 0.1 mm
Default value 0
ALG-F-L Adj frnt align plate shift(large) trimmr
Lv.1 Details To adjust the push-on amount of front alignment plate when aligning
the inner sheets with 298 mm or more in depth.
As the value is increased by 1, push-on amount changes by 0.1 mm.
+: increase
-: decrease
Use case When the alignment is displaced in horizontal direction
Display/adj/set range -30 to 30
Unit 0.1 mm
Default value 0
8-427
8-427