Canon imagePRESS 1135 Series Service Manual page 1379

SORTER> ADJUST
PF-LGLZ1 Adj of LGL Z-fold position (1st): PFU
Lv.1 Details Adjust the 1st fold position of LGL paper Z-fold position of the paper
folding unit.
Increase the input value by 1, the fold position will move by 0.1 mm.
+:
-:
Use case If the fold position adjustment in additional function mode is
inadequate
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range -128 to 127
Unit 0.1 mm
Appropriate target value 0
Default value 0
PF-LGLZ2 Adj of LGL Z-fold position (2nd): PFU
Lv.1 Details Adjust the 2nd fold position of LGL paper Z-fold position of the paper
folding unit.
Increase the input value by 1, the fold position will move by 0.1 mm.
+:
-:
Use case If the fold position adjustment in additional function mode is
inadequate
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range -128 to 127
Unit 0.1 mm
Appropriate target value 0
Default value 0
PFLTRRZ1 Adj of LTRR Z-fold position (1st): PFU
Lv.1 Details Adjust the 1st fold position of LTRR paper Z-fold position of the paper
folding unit.
Increase the input value by 1, the fold position will move by 0.1 mm.
+:
-:
Use case If the fold position adjustment in additional function mode is
inadequate
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range -128 to 127
Unit 0.1 mm
Appropriate target value 0
Default value 0
8
Service Mode > SORTER > ADJUST
8 Service Mode > SORTER > ADJUST
SORTER> ADJUST
PFLTRRZ2 Adj of LTRR Z-fold position (2nd): PFU
Lv.1 Details Adjust the 2nd fold position of LTRR paper Z-fold position of the
paper folding unit.
Increase the input value by 1, the fold position will move by 0.1 mm.
+:
-:
Use case If the fold position adjustment in additional function mode is
inadequate
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range -128 to 127
Unit 0.1 mm
Appropriate target value 0
Default value 0
PF-A4RC1 Adj of A4R C-fold position (1st): PFU
Lv.1 Details Adjust the 1st fold position of A4R paper C-fold position of the paper
folding unit.
Increase the input value by 1, the fold position will move by 0.1 mm.
+:
-:
Use case If the fold position adjustment in additional function mode is
inadequate
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range -70 to 127
Unit 0.1 mm
Appropriate target value 0
Default value 0
PF-A4RC2 Adj of A4R C-fold position (2nd): PFU
Lv.1 Details Adjust the 2nd fold position of A4R paper C-fold position of the paper
folding unit.
Increase the input value by 1, the fold position will move by 0.1 mm.
+:
-:
Use case If the fold position adjustment in additional function mode is
inadequate
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range -128 to 70
Unit 0.1 mm
Appropriate target value 0
Default value 0
8-436
8-436