Canon imagePRESS 1135 Series Service Manual page 1385

SORTER> ADJUST
SBRL-MTR Swbk rollr up/down motr pstn adj: P bndr
Lv.1 Details To adjust the home position of switchback roller up/down motor in the
perfect binder.
A distance between the stacking tray and switchback roller is to be 3
to 4 mm.
As the input value is changed by 1, the home position is increased/
decreased by 0.25 mm.
+: Decrease
: Increase
Use case • At the paper stack alignment failure in feeding direction or the
missing page occurrence
• When the position is changed back to the factory adjustment value
at the EEPROM/master controller PCB replacement
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range -9 to 9
Unit 0.25 mm
Default value 0
BFR-UPA4 Adj Swng Roll rising tmg for A4: Fin-AG
Lv.1 Details To adjust the Swing Roller rise timing when A4 size paper is waited
in the buffer path.
As the value is incremented by 1, the rise timing becomes early by 1
msec.
Use case When misalignment occurs in A4 size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 50
Unit 1 msec
BFR-UPB5 Adj Swng Roll rising tmg for B5: Fin-AG
Lv.1 Details To adjust the Swing Roller rise timing when B5 size paper is waited
in the buffer path.
As the value is incremented by 1, the rise timing becomes early by 1
msec.
Use case When misalignment occurs in B5 size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 50
Unit 1 msec
8
Service Mode > SORTER > ADJUST
8 Service Mode > SORTER > ADJUST
SORTER> ADJUST
BFR-UPLT Adj Swng Roll rising tmg for LTR: Fin-AG
Lv.1 Details To adjust the Swing Roller rise timing when LTR size paper is waited
in the buffer path.
As the value is incremented by 1, the rise timing becomes early by 1
msec.
Use case When misalignment occurs in LTR size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 50
Unit 1 msec
RTR-DWA4 Adj Ppr Rtn Roll fall tmg (A4): Fin-AG
Lv.1 Details To adjust the Paper Return Roller fall timing when A4 size paper is
waited in the buffer path.
As the value is incremented by 1, the fall timing becomes early by
1 msec.
Use case When misalignment occurs in A4 size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 50
Unit 1 msec
RTR-DWB5 Adj Ppr Rtn Roll fall tmg (B5): Fin-AG
Lv.1 Details To adjust the Paper Return Roller fall timing when B5 size paper is
waited in the buffer path.
As the value is incremented by 1, the fall timing becomes early by
1 msec.
Use case When misalignment occurs in B5 size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 50
Unit 1 msec
RTR-DWLT Adj Ppr Rtn Roll fall tmg (LTR): Fin-AG
Lv.1 Details To adjust the Paper Return Roller fall timing when LTR size paper is
waited in the buffer path.
As the value is incremented by 1, the fall timing becomes early by
1 msec.
Use case When misalignment occurs in LTR size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 50
Unit 1 msec
8-442
8-442