Canon imagePRESS 1135 Series Service Manual page 1368

FEEDER> FUNCTION
FEED-CHK Specifying DADF individual feed mode
Lv.1 Details Specify the paper pass mode for DADF.
Paper pass operation is activated by FEED-ON.
Use case At the time of operation check
Adj/set/operate method Enter the value and press the OK key.
Display/adj/set range 0 to 3
0: 1-sided pickup/delivery operation
1: 2-sided pickup/delivery operation
2: 1-sided pickup/delivery operation (with stamp)
3: 2-sided pickup/delivery operation (with stamp)
Related service mode FEEDER> FUNCTION> FEED-ON
FAN-CHK Specifying DADF operation fan
Lv.1 Details Specify the DADF fan to operate.
The fan is activated by FAN-ON.
Use case At the time of operation check
Adj/set/operate method Enter the value and press the OK key.
Display/adj/set range 0 to 2
0: Read motor cooling fan (FM1)
1: Motor driver cooling fan (FM2)
2: Scanner unit cooling fan (FM3)
Related service mode FEEDER> FUNCTION> FAN-ON
FAN-ON Operation check of DADF fan
Lv.1 Details Start operation check for the fan specified by FAN-CHK.
Use case At the time of operation check
Adj/set/operate method 1) Select the item and press the OK key.
The fan operates for approximately 5 seconds and automatically
stops.
2) Press the OK key.
The operation check is completed.
Caution Be sure to press the OK key again after execution. The operation
automatically stops after approximately 5 seconds, but is not
completed unless the OK key is pressed (STOP is not displayed).
Required time Approx. 5 seconds
Related service mode FEEDER> FUNCTION> FAN-CHK
SL-CHK Specifying DADF operation solenoid
Lv.1 Details Specify the DADF solenoid to operate.
The solenoid is activated by SL-ON.
Use case At the time of operation check
Adj/set/operate method Enter the value and press the OK key.
Display/adj/set range 0: Separation solenoid (SL1)
Related service mode FEEDER> FUNCTION> SL-ON
8
Service Mode > FEEDER > FUNCTION
8 Service Mode > FEEDER > FUNCTION
FEEDER> FUNCTION
SL-ON Operation check of DADF solenoid
Lv.1 Details Start operation check for the solenoid specified by SL-CHK.
Use case At the time of operation check
Adj/set/operate method 1) Select the item and press the OK key.
The unit operates for approximately 5 seconds and automatically
stops.
2) Press the OK key.
The operation check is completed.
Caution Be sure to press the OK key again after execution. The operation
automatically stops after approximately 5 seconds, but is not
completed unless the OK key is pressed (STOP is not displayed).
Required time Approx. 5 seconds
Related service mode FEEDER> FUNCTION> SL-CHK
MTR-ON Operation check of motor
Lv.1 Details Start operation check for the motor specified by MTR-CHK.
Use case At the time of operation check
Adj/set/operate method 1) Select the item and press the OK key.
The unit operates for approximately 5 seconds and automatically
stops.
2) Press the OK key.
The operation check is completed.
Caution Be sure to press the OK key again after execution. The operation
automatically stops after approximately 5 seconds, but is not
completed unless the OK key is pressed (STOP is not displayed).
Required time Approx. 5 seconds
Related service mode FEEDER> FUNCTION> MTR-CHK
ROLL-CLN Rotation of DADF roller
Lv.1 Details Rotation to clean the DADF roller.
Clean it by putting the lint-free paper moistened with alcohol while
roller is rotating.
Use case At the time of cleaning of the roller
Adj/set/operate method 1) Select the item and press the OK key.
2) Clean the rotating roller with lint-free paper moistened with
alcohol.
3) Press the OK key.
The roller stops.
FEED-ON Operation check of DADF individual feed
Lv.1 Details Start operation check for the paper pass mode specified by FEED-
CHK.
Use case At the time of operation check
Adj/set/operate method Select the item and press the OK key.
Related service mode FEEDER> FUNCTION> FEED-CHK
8-425
T-8-110
8-425