1F-35 Engine Cooling System:
Cooling Fan and Shroud Replacement
Special tool
GE-47716 1617 Vac N Fill Coolant Refill Tool
Removal Procedure
1. Remove the front fascia. Refer to "Front Bumper
Fascia Replacement: ".
2. Drain the coolant. Refer to "Draining and Filling
Cooling System (LY7 GE 47716 Fill)" "Draining and
Filling Cooling System (LY7 Static Fill)".
3. Disconnect the electrical connectors from the fan
motors.
4. Unclip the wire harness from the fan assembly.
5. Remove the condenser radiator fan module (CRFM)
closeout panel retainers from the condenser.
6. Remove the CRFM closeout panel from the
condenser.
7. Remove the front impact bar. Refer to "Front Bumper
Impact Bar Replacement: ".
8. Remove the CRFM mounting bracket bolts from the
radiator support.
9. Remove the CRFM mounting brackets from the
radiator support.
10. Remove the radiator inlet hose clamp from the
radiator (1).
11. Remove the radiator inlet hose from the radiator (2)