Table of Contents
Advertisement
Catalytic Converter Replacement - Left Side
Removal Procedure
WARNING
!
Refer to "Exhaust Service Caution".
WARNING
!
Refer to "Protective Goggles and Glove
Caution: ".
1. Remove the exhaust manifold heat shield. Refer to
"Exhaust Manifold Heat Shield Replacement - Left
Side".
2. Remove the catalytic converter to exhaust manifold
nuts (1).
3. Raise and support the vehicle. Refer to "Lifting and
Jacking the Vehicle: ".
4. Disconnect the heated oxygen sensor (HO2S)
electrical connector (2) from the engine wiring
harness electrical connector.
5. Remove the left catalytic converter to exhaust
flexible pipe bolts.
6. Remove the catalytic converter from the vehicle.
7. Remove and discard the catalytic converter to
exhaust manifold gasket (2).
8. Remove and discard the catalytic converter to
exhaust flexible pipe gasket (1).
Exhaust System:
1K-12
Advertisement
Table of Contents
Troubleshooting
