Suzuki XL7 2007 Service Manual page 964

1K-15 Exhaust System:
Installation Procedure
1. Install a NEW catalytic converter to exhaust manifold
gasket (1) onto the catalytic converter.
2. Install the catalytic converter to the vehicle.
3. Install a NEW catalytic converter to exhaust flexible
pipe gasket (2) between the converter and the
flexible pipe.
CAUTION
!
Refer to "Fastener Notice: ".
4. Install the right catalytic converter to exhaust flexible
pipe nuts.
Tightening torque
Tighten the nuts to 22 N⋅m (16 lb ft).
5. Connect the HO2S electrical connector (2) to the
engine wiring harness electrical connector.
6. Lower the vehicle.
7. Install the catalytic converter to exhaust manifold
nuts (1).
Tightening torque
Tighten the nuts to 50 N⋅m (37 lb ft).
8. Install the exhaust manifold heat shield. Refer to
"Exhaust Manifold Heat Shield Replacement - Right
Side".