Table of Contents
Advertisement
1G-38 Fuel System:
6. This step applies to Sliding Retainer style connectors
ONLY. Release the fitting by pressing on one side of
the release tab causing it to push in slightly. If the tab
doesn't move try pressing the tab in from the
opposite side. The tab will only move in one direction
WARNING
!
Refer to "Relieving Fuel Pressure Caution".
7. Pull the connection apart.
Installation Procedure
WARNING
!
Refer to "Fuel Pipe Fitting Caution".
1. Apply a few drops of clean engine oil to the male
connection end.
2. Push both sides of the quick-connect fitting together
in order to cause the retaining feature to snap into
place.
Advertisement
Table of Contents
Troubleshooting
