Suzuki XL7 2007 Service Manual page 673

NOTE
A constant and continuous flow of clean
engine oil is required in order to properly
prime the engine. Use the approved engine
oil as specified in the owner's manual.
6. Pump the handle of the J 45299 in order to flow a
minimum of 1-1.9 liters (1-2 quarts) of fresh clean
engine oil. Observe the flow of engine oil through the
flexible hose and into the engine assembly.
7. Close the valve of the J 45299.
8. Remove the J 45299 flexible hose.
9. Remove the fitting from the EN-47971.
10. Remove the EN-47971 from the oil filter adapter.
CAUTION
!
This engine uses a special high performance
oil filter. Use of any other filter may lead to
filter failure and/or severe engine damage.
11. Ensure the NEW oil filter is filled with clean fresh
engine oil.
CAUTION
!
Refer to "Fastener Notice: ".
12. Install the NEW oil filter.
Tightening torque
Tighten the oil filter to 32 N⋅m (24 lb ft).
Engine Mechanical: 1D-333