Table of Contents
Advertisement
Transfer:
3C-1
Transfer
General Description
Transfer Case Description and Operation
The Getrag 760 transfer case consists of an aluminum housing, input shaft and gear, and a ring and pinion power
transfer system.
The Getrag 760 transfer case transfers torque/power from the input shaft through the ring and pinion assembly to the
rear differential via a 1-piece propeller shaft assembly.
The on-demand rear differential and torque tube assembly distributes variable torque/power to the rear wheels via
individual axle shafts.
The Getrag 760 transfer case is a single speed unit. Torque transfer is electronically controlled, dependent on the
demand of the rear differential.
The power take-off unit (PTU) uses synthetic hypoid gear lubricant, which is intended for lifetime service. Full fluid
level is at the bottom of the fill plug hole when the vehicle is on a level surface.
Schematic and Routing Diagram
All-Wheel Drive Schematics
Advertisement
Table of Contents
Troubleshooting
