Table of Contents
Advertisement
1D-70 Engine Mechanical:
4. Install the engine mount upper bracket and bolt (1) to
the engine. Do not tighten the bolt.
5. Tighten the right upper engine mount bracket bolt
(2).
Tightening torque
Tighten the right upper engine mount bracket
bolt to 50 N⋅m (38 lb ft).
6. Install the upper engine mount bracket bolts (1).
Tightening torque
Tighten the upper engine mount bracket bolts to
110 N⋅m (81 lb ft).
7. Lower the vehicle.
8. Remove the engine support. Refer to "Engine
Support Fixture".
9. Install the air cleaner assembly. Refer to "Air Cleaner
Assembly Replacement".
Engine Mount Strut Replacement - Right
Side
Removal Procedure
1. Remove the air cleaner assembly. Refer to "Air
Cleaner Assembly Replacement".
2. Remove the engine mount strut to bracket bolts (1).
3. Rotate strut (2) vertical then remove engine mount
strut to side rail nuts (3).
4. Remove the strut from vehicle.
Installation Procedure
CAUTION
!
Refer to "Fastener Notice: " in Cautions and
Notices.
Advertisement
Table of Contents
Troubleshooting
