Suzuki XL7 2007 Service Manual page 407

7. Remove the upper engine mount bracket nuts (1).
8. Remove the lower bracket bolts (2).
9. Remove the ABS connector clip from the frame.
10. Remove the mount (3) and the lower bracket (4)
from the vehicle.
11. Remove the upper bracket bolt (1) from the bracket.
12. Remove the upper bracket.
13. Remove the engine mount (3) from the lower bracket
(4).
Installation Procedure
CAUTION
!
Refer to "Fastener Notice: " in Cautions and
Notices.
1. Install the engine mount (3) to the lower bracket (4).
Tightening torque
Tighten the nuts to 50 N⋅m (38 lb ft).
2. Install the engine mount upper bracket and bolt (1) to
the engine. Do not tighten the bolt.
3. Install the ABS connector clip to the bracket.
Engine Mechanical: 1D-67